Minimum Delay; Initial Delay; Dtmf; Dtmf Type - Panasonic KX-UTG200 Administrator's Manual

4.5.3 VoIP Settings [Line 1]–[Line n]
Value Range
Default Value
Configuration File Reference

Minimum Delay

Description
Value Range
Default Value
Configuration File Reference

Initial Delay

Description
Value Range
Default Value
Configuration File Reference

4.5.3.4 DTMF

DTMF Type

Description
116 Administrator Guide
3–50 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than [Initial Delay]
–
This value must be greater than [Minimum Delay]
–
[Initial Delay] must be greater than or equal to [Minimum
Delay]
20 (´ 10 ms)
MAX_DELAY (Page 254)
Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
1 or 2 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to [Initial Delay]
–
This value must be less than [Maximum Delay]
–
[Maximum Delay] must be greater than [Initial Delay]
2 (´ 10 ms)
MIN_DELAY (Page 255)
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
1–7 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to [Minimum
Delay]
–
This value must be less than [Maximum Delay]
2 (´ 10 ms)
NOM_DELAY (Page 255)
Selects the method for transmitting DTMF (Dual Tone Multi-Frequency)
tones.
Document Version 2014-04