4.4.3 User Password
4.4.3 User Password
This screen allows you to change the password used to authenticate the User account when logging in to the
Web user interface.
Note
•
For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
4.4.3.1 User Password
Current Password
Description
Value Range
Default Value
Configuration File Reference
New Password
Description
Value Range
Default Value
Configuration File Reference
96
Administrator Guide
Specifies the current password to use to authenticate the User account
when logging in to the Web user interface.
6–16 characters (except ", &, ', :, <, >, and space)
Not stored.
USER_PASS (Page 202)
Specifies the new password to use to authenticate the User account
when logging in to the Web user interface.
6–16 characters (except ", &, ', :, <, >, and space)
Not stored.
Note
•
When a user logs in to the Web user interface for the first time,
after clicking OK on the authentication dialog box, the [Change
User Password] screen is displayed automatically to make the
user set a password.
USER_PASS (Page 202)
Document Version 2014-04