Cfg_Root_Certificate_Path3; Network Settings; Ip Settings; Ip_Addr_Mode - Panasonic KX-UTG200 Administrator's Manual

Description
Value Range
Default Value

CFG_ROOT_CERTIFICATE_PATH3

Value Format
Description
Value Range
Default Value

5.4 Network Settings

5.4.1 IP Settings

IP_ADDR_MODE

Value Format
Description
Value Range
Document Version 2014-04
Specifies the URL of the root certificate. This setting should only be
placed in the initial configuration file.
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
Max. 1024 characters
Empty string
String
Specifies the URL of the root certificate. This setting should only be
placed in the initial configuration file.
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
Max. 1024 characters
Empty string
Integer
Specifies the IP address mode.
0-2
–
0: IPv4
–
1: IPv6
–
2: dual
5.4.1 IP Settings
Administrator Guide 219