Controls On The Window - Panasonic KX-UTG200 Administrator's Manual

1.1.5 Web User Interface Programming
4.
You can close from the Web user interface at any time by clicking [Web Port Close].

Controls on the Window

The Web user interface window contains various controls for navigating and configuring settings. The following
figure shows the controls that are displayed on the [Basic Network Settings] screen as an example:
A
B
C
Note
•
The screen shots shown are taken from the Web user interface of the KX-UTG300 (or, in some cases,
KX-UTG200), so the model name may differ from that shown on your PC.
•
Actual default values may vary depending on your phone system dealer.
Tabs
Tabs are the top categories for classifying settings. When you click a tab, the corresponding menu items
and the configuration screen of the first menu item appear. There are 8 tabs for the Administrator account
and 7 tabs for the User account. For details about the account types, see Access Levels (IDs and
Passwords) in this section.
Menu
The menu displays the sub-categories of the selected tab.
Buttons
The following standard buttons are displayed in the Web user interface:
Button
Web Port Close
Save
Cancel
Refresh
Configuration Screen
Clicking a menu displays the corresponding configuration screen, which contains the actual settings,
grouped into sections. For details, see 4.2 Status to 4.8.7.5 Restart.
28 Administrator Guide
Closes the Web port of the unit after a confirmation message is displayed.
Applies changes and displays a result message (® see Result Messages in
this section).
Discards changes. The settings on the current screen will return to the values
they had before being changed.
Updates the status information displayed on the screen. This button is
displayed in the upper-right area of the [Network Status] and [VoIP Status]
screens.
D
Function
Document Version 2014-04