Default Value
IPv6 Prefix Length
Description
Value Range
Default Value
IPv6 Default Gateway
Description
Value Range
Default Value
IPv6 DNS1
Description
Value Range
Default Value
IPv6 DNS2
Description
Value Range
Default Value
4.3.4 Ethernet Port Settings
This screen allows you to change the connection mode of the Ethernet ports and the VLAN settings.
Note
•
When you change the settings on this screen and click [Save], after the message "Save Complete!"
has been displayed, the unit will restart automatically with the new settings applied. If a unit is on a call
when "Save Complete!" has been displayed, the unit will restart after the unit returns to idle.
•
Incorrect settings may cause a network failure. In such a case, you cannot access the Web user
interface anymore. To access it again, you need to correct the speed/duplex settings or perform IP
Document Version 2014-04
Not stored.
Specifies the IPv6 prefix length.
NULL, 1-128
Not stored.
Specifies the IPv6 address of the default gateway for the network where
the unit is connected.
Max. 46 characters
Not stored.
Specifies the IPv6 address of the primary DNS server.
Max. 46 characters
Not stored.
Specifies the IPv6 address of the secondary DNS server.
Max. 46 characters
Not stored.
4.3.4 Ethernet Port Settings
Administrator Guide
85