Cfg_Standard_File_Path; Cfg_Product_File_Path - Panasonic KX-UTG200 Administrator's Manual

Description
Value Range
Default Value

CFG_STANDARD_FILE_PATH

Value Format
Description
Value Range
Default Value

CFG_PRODUCT_FILE_PATH

Value Format
Document Version 2014-04
Specifies whether to enable the device to acquire the Provisioning URL
using the SIP PnP method.
•
Y (Enable SIP PnP)
•
N (Disable SIP PnP)
Y
String
Specifies the URL of the standard configuration file, which is used when
every unit needs different settings.
Note
•
When you change this setting, set "PROVISION_ENABLE" to
"Y" at the same time.
Max. 1024 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this URL, it will be replaced with the
unit's firmware version.
•
If this URL ends with "/" (slash), "Config{mac}.cfg" is
automatically added at the end of the URL.
For example, CFG_STANDARD_FILE_PATH="http://
host/dir/" becomes
CFG_STANDARD_FILE_PATH="http://host/dir/
Config{mac}.cfg".
Empty string
String
5.3.6 Provisioning Settings
Administrator Guide 213