Phone Number; Voip Status; Default Line; Qos Status - Panasonic KX-UTG200 Administrator's Manual

Phone Number

Description
Value Range
Default Value
Configuration File Reference

VoIP Status

Description
Value Range
Default Value

Default Line

Description
Value Range
Default Value

4.2.4 QoS Status

This screen allows you to view the current QoS status.
Document Version 2014-04
Indicates the currently assigned phone numbers (reference only).
Note
•
The corresponding field is blank if a line has not yet been leased
or if the unit has not been configured.
Max. 32 digits
Not applicable.
PHONE_NUMBER (Page 268)
Indicates the current VoIP status of each line (reference only).
•
Registered: The unit has been registered to the SIP server, and the
line can be used.
•
Registering: The unit is being registered to the SIP server, and the
line cannot be used.
•
Blank: The line has not been leased, the unit has not been
configured yet, or a SIP authentication failure has occurred.
•
Register failed: The unit failed to register to the SIP server.
Note
•
Immediately after starting up the unit, the phone numbers of the
lines will be displayed, but the status of the line may not be
displayed because the unit is still being registered to the SIP
server. To display the status, wait about 30 to 60 seconds, and
then click [Refresh] to obtain updated status information.
Not applicable.
Indicates which line is the default line.
•
Blank
•
V
Not applicable.
4.2.4 QoS Status
Administrator Guide 77