Firm_Upgrade_Auto; Provisioning Settings; Provision_Enable - Panasonic KX-UTG200 Administrator's Manual

Value Range
Default Value
Web User Interface Reference

FIRM_UPGRADE_AUTO

Value Format
Description
Value Range
Default Value

5.3.6 Provisioning Settings

PROVISION_ENABLE

Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2014-04
Max. 1024 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>".
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this URL, it will be replaced with
"FIRM_VERSION" depending on the system. Note that this rule
differs from other parameters such as "SIP_USER_AGENT".
Empty string
Firmware File URL (Page 159)
Boolean
Specifies whether to display a confirmation message asking the user
to perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
•
Y (Enable automatic firmware update)
•
N (Disable automatic firmware update)
Y
Boolean
Specifies whether to enable auto provisioning.
•
Y (Enable auto provisioning)
•
N (Disable auto provisioning)
Y
Enable Provisioning (Page 160)
5.3.6 Provisioning Settings
Administrator Guide 211