Cfg_File_Key; Cfg_File_Key_Length - Panasonic KX-UTG200 Administrator's Manual

Value Range
Default Value

CFG_FILE_KEY

Value Format
Description
Value Range
Default Value

CFG_FILE_KEY_LENGTH

Value Format
Document Version 2014-04
Max. 1024 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this URL, it will be replaced with the
unit's firmware version.
•
If this URL ends with "/" (slash), "sip.cfg" is automatically added
at the end of the URL.
For example, CFG_MASTER_FILE_PATH="http://host/
dir/" becomes CFG_MASTER_FILE_PATH="http://
host/dir/sip.cfg".
Empty string
Note
•
The URL specified by your phone system dealer may be preset
in the unit.
String
Specifies the encryption key (password) used to decrypt configuration
files.
Note
•
If the extension of the configuration file is ".enc", the
configuration file will be decrypted using this key.
Max. 32 characters
Note
•
If an empty string is set for this parameter, decryption with this
value is disabled.
Empty string
Integer
5.3.6 Provisioning Settings
Administrator Guide 215