4.6.2 Call Control [Line 1]–[Line n]
Value Range
Default Value
No Answer (Ring Count)
Description
Value Range
Default Value
4.6.2.5 Call Park & Call Pickup
Call Park (Enable)
Description
Value Range
Default Value
Configuration File Reference
Call Park (Code)
Description
Value Range
Default Value
Configuration File Reference
Call Park Retrieve (Enable)
Description
132
Administrator Guide
Max. 32 characters
Note
•
You cannot leave this field empty if [No Answer (Enable Call
Forward)] is set to [Yes].
Not stored.
Specifies the number of times that an incoming call rings until the call
is forwarded.
Note
•
If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
0, 2–20 (0: No ring)
3
Specifies whether call park is enabled or disabled.
•
Yes
•
No
No
PARK_ENABLE (Page 264)
Specifies the code used for call park.
Max. 32 characters (0-9, *, #)
Not stored.
PARK_CODE (Page 264)
Specifies whether call park retrieve is enabled or disabled.
Document Version 2014-04