OUTBANDDTMF_VOL
Value Format
Description
Value Range
Default Value
INBANDDTMF_VOL
Value Format
Description
Value Range
Default Value
5.6.3 All Lines - Call Control Settings
RETURN_VOL_SET_DEFAULT_ENABLE
Value Format
Description
Value Range
Default Value
5.7 Per Line Settings
5.7.1 Per Line - VoIP
CODEC_ENABLE_G722
Value Format
Description
Value Range
Default Value
Document Version 2014-04
Integer
Specifies the volume (in decibels [dB]) of the DTMF tone using RFC
2833.
(-63)–0
-10
Integer
Specifies the volume (in decibels [dB]) of in-band DTMF tones.
(-46)–0
-10
Boolean
Specifies whether the volume is returned to its default setting after each
call.
•
Y (Volume returns to the default setting after each call)
•
N (Volume does not change after each call)
N
Boolean
Specifies whether to enable G722 codec.
•
Y (Enable)
•
N (Disable)
Y
5.7.1 Per Line - VoIP
Administrator Guide
251