Log Display; System Dump; Sniffer Dump; Qos Status (Voice Quality Monitoring) - Panasonic KX-UTG200 Administrator's Manual

7.3 QoS Status (Voice Quality Monitoring)

to the Syslog server. Syslog servers can manage analysis and debugging of messages from various devices
and platforms.
Related configuration file parameters
•
SYSLOG_ADDR (Page 207)
•
SYSLOG_PORT (Page 207)
•
SYSLOG_SERVER_ENABLE (Page 208)
•
SYSLOG_SEVERITY (Page 208)
Log Level Settings
Log Level Settings (® see Page 168) is used to specify the type and class of logs uploaded to the server.

7.2.2 Log Display

Log Display (® see Page 184) is used to specify the type and class of logs and then display the specified logs.

7.2.3 System Dump

System Dump (® see Page 186) is used to export the unit's running information, such as the IP address
obtained from DHCP server, CDP/LLDP settings, and DHCP options. For details about the System Dump
function, consult your phone system dealer.

7.2.4 Sniffer Dump

Sniffer Dump (® see Page 187) is used to capture packets on the network and export them for analysis. For
details about the Sniffer Dump function, consult your phone system dealer.
7.3 QoS Status (Voice Quality Monitoring)
QoS Status (® see Page 78) under the [Status] tab of the web user interface can be used to check the codec
used and the voice quality of phone calls with the unit. When on a phone call check the information displayed
300 Administrator Guide Document Version 2014-04