B6.6 System Caller Name Announcement - Panasonic KX-TVS90 Installation Manual

SYSTEM ADMINISTRATOR'S GUIDE

B6.6 System Caller Name Announcement

Up to 120 Caller ID numbers can be assigned to announce prerecorded Caller ID caller names
when extension users listen to messages from the assigned numbers left in their mailbox.
Extension users can also hear caller names when the VPS forwards calls from the assigned
numbers to them (Caller ID Screening). The recorded caller names will also play when the
callers use the Intercom Paging features; the recorded names will be added to the end of the
page.
The Caller ID Screening feature is enabled or disabled in the COS (Class of Service) settings.
This feature is also enabled by selecting "Call Screening" in 4.1 Call Transfer Status in the
Subscriber's Guide.
The Intercom Paging feature is enabled by selecting "Intercom Paging" in 4.1 Call Transfer
Status, and/or in 4.3 Incomplete Call Handling Status in the Subscriber's Guide.
The Message Manager is responsible for recording System Caller Names.
To access the proper menu for System Caller Name Announcement, follow the menu
path as shown:
System Administration Top Menu-1-5-6
System Caller Name Announcement-Enter
To access the proper menu for System Caller Name Announcement-Enter, follow the
menu path as shown:
System Administration Top Menu-1-5-6-1-Caller ID List No.(1-120)
Parameter
Caller ID No.
Description
272
Value Range
(Default)
Up to 20 digits Assigns the telephone number for which the VPS
consisting of 1-9, 0 announces prerecorded caller name to extension users.
(None)
Up to 20 characters Enters a name and/or description of the Caller ID
(None) number. Any ASCII character (except \) can be used.
Table 60
Description/Function
Installation Manual