Panasonic KX-TVS90 Installation Manual page 138

CUSTOMIZING THE SYSTEM
Description
No Answer
Coverage
Mode
Message
Repeat Cycle
*: Note
In the following cases, the caller cannot "select". He is directed to Operator 1's mailbox
when he is transferred to the operator but the operator does not answer:
1.
No input to Automated Attendant.
2.
No input to Custom Service menu when "No DTMF Input Operation" is set to "C.
Operator" in Table 53 in B5.2 Custom Service.
3.
No input to Voice Mail service when "Rotary Telephone Call Coverage" is set to
"Operator Extension" in Table 70 in B6.7 Other Parameters.
138
Value Range
(Default)
1. Caller Select
2. Leave Message
3. Disconnect Message
4. Next Operator
(Caller Select)
1-3 Times
(3)
Table 24
Description/Function
Specifies how to handle Operator 1 calls when not
answered within the time period set by the
"Operator No Answer Time" mode.
1. Caller Select*—Allows the caller to leave a
message or call another extension.
2. Leave Message—Instructs the caller to leave a
message in Operator 1's mailbox.
3. Disconnect Message—Disconnects the caller
after playing "Thank you for calling."
4. Next Operator—Transfers the caller to
Operator 2.
Specifies the number of times that the VPS will
play the Automated Attendant top menu.
Installation Manual