Panasonic KX-TVS90 Installation Manual page 252

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
No Answer
Coverage
Mode
Notes
• An operator-seeking call will always reach Operator 1 first. The call will then be
transferred to Operator 2 and Operator 3 sequentially, depending on system
programming.
• "Next Operator" is not applicable for "No Answer Coverage Mode" of Operator 3.
Operator's Parameters-Night Mode-Operator 1, 2, 3
Same as Day Mode.
Operator's Parameters-Lunch Mode-Operator 1, 2, 3
Same as Day Mode.
Operator's Parameters-Break Mode-Operator 1, 2, 3
Same as Day Mode.
252
Value Range
(Default)
1. Caller Select Specifies how to handle Operator 3 calls when not
2. Leave Message answered within the time period set by the "Operator No
3. Disconnect Answer Time" mode.
Message
(Caller Select)
1. Caller Select—Allows the caller to leave a message
or call another extension. (In some cases, a call to
another extension is not available. For more
information, see the "Note" on "Caller Select" in
Table 24 in 5.4.3 Operator's Parameters.)
2. Leave Message—Instructs the caller to leave a
message in Operator 3's mailbox.
3. Disconnect message—Disconnects the caller after
Table 47
Description/Function
playing "Thank you for calling".
Installation Manual