Panasonic KX-TVS90 Installation Manual page 276

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Outgoing Call
Setup
Sequence
Other Parameters-Message Waiting Notification
Controls the handling of message waiting notification calls.
To access the proper menu for Message Waiting Notification Parameter, follow the
menu path as shown:
System Administration Top Menu-1-5-7-3
Parameter
Outgoing Call
Ports
276
Value Range
(Default)
Up to 12 digits Specifies the sequence of codes used by the VPS when
consisting of calling a CO line. You can set up to 12 digits. The
default value is "T". "T" indicates that the system will
0-9, , #, F, R, S, T,
dial the telephone number only after detecting a dial
W
tone.
(T)
Example:
9W = (9) - 1-s wait - dial telephone number. "9" is the
CO line access number.
F: Hook Flash
R: Ringback Tone Detection
S: Silence Detection
T: Dial Tone Detection
W: Wait for 1 s
1-9, 0, , #: Dial Codes
Value Range
(Default)
Port No. Specifies the port numbers used for the Message Waiting
(1-2) Notification Device feature. The VPS makes outgoing
calls using the port specified in this parameter. At least 1
port must be specified.
Table 62
Description/Function
Table 63
Description/Function
Installation Manual