Panasonic KX-TVS90 Installation Manual page 338

MESSAGE MANAGER'S GUIDE
• [1] FWD All
• [2] FWD Busy
• [3] FWD No Answer
• [4] FWD Busy or No Answer
• [5] FWD to CO
• [6] FWD Cancel
4.
For the items selected in Step 3, follow these steps:
• For FWD All—Go to Step 5.
• For FWD Busy—Go to Step 5.
• For FWD No Answer—Go to Step 5.
• For FWD Busy or No Answer—Go to Step 5.
• For FWD to CO—Go to Step 7.
• For FWD Cancel—Go to Step 10.
5.
Type the extension number.
6.
Confirm the entry is correct and Press [2] to accept it. Go to Step 11.
Note
Press [1] to change the extension number—Return to Step 5.
7.
Press [1] or [2] to select Telephone number 1 or Telephone number 2 (Go to Step 9), or
Press [3] to select another telephone number.
8.
Type the telephone number using "0-9" and " ".
Notes
• Please make sure you begin the telephone number with a Line Access Code (to
seize a CO line).
• When connected to the KX-TD816/TD1232/TA1232, the maximum number of
characters allowed to be entered is 16; when connected to the KX-TD500, 24.
9.
Confirm the entry is correct and Press [2] to accept it. Go to Step 11.
Note
Press [1] to change the telephone number. Return to Step 7.
10.
Call Forwarding is canceled. Press [2] to accept it.
11.
Call Forwarding setting data is transmitted to the PBX. If the forwarding setting or
canceling has been completed properly, you will hear: "Call forwarding accepted" or "Call
forwarding is canceled".
338 Installation Manual