Panasonic KX-TVS90 Installation Manual page 248

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Operator's
Extension
Operator's
Mailbox No.
Operator No
Answer Time
Busy Coverage
Mode
248
Value Range
(Default)
1-5 digits Specifies the extension number for Operator 1.
(0)
Note 1: The default setting (0) cannot be used with the
Message Waiting Notification—Lamp feature. An
extension number must be assigned that is included in the
Extension Numbering Plan.
Note 2: The extension number must not be assigned
anywhere else (in particular, the extension must not have
a mailbox). Otherwise, you will get an error message.
2-5 digits Callers to Operator 1 are prompted to leave a message in
(998) this mailbox depending upon how the Busy Coverage or
No Answer Coverage modes are set.
10-60 s When a call to Operator 1, 2, or 3 is not answered within
(30) the time set, the VPS will offer other options as defined by
the "No Answer Coverage Mode".
Note 1: This timer applies to Operator 1, 2, and 3.
Note 2: If more than 1 operator is assigned, we
recommend to reduce the time on the "Operator No
Answer Time" to 15 s.
1. Hold Specifies how to handle calls when the Operator 1
2. No Answer extension is busy.
Coverage
3. Call Waiting
1. Hold—Automatically places the caller on hold and the
4. Disconnect
Operator 1 extension is called again.
Message
(Hold)
2. No Answer Coverage—Offers the option specified by
the No Answer Coverage Mode to the caller.
3. Call Waiting—Signals the Operator 1 when another
call is waiting using the Call Waiting feature of the
PBX.
4. Disconnect Message—Disconnects the caller after
playing "Thank you for calling".
Table 45
Description/Function
Installation Manual