Print Reports At Specified Time (Pset) - Panasonic KX-TVS90 Installation Manual

1.
Type TIME, then Press RETURN.
$ TIME
Current time is 12:34, PM
Enter new time (HH:MM, AM/PM) : =
2.
Type the current time.
Current date is MON JAN-1-2001
Enter new date (MM-DD-YY) : =
3.
Type the current date. For the year, type the last 2 digits.
Note
Enter the exact time and date. This command cannot be used when either the System
or the Message Manager is accessing the time setting feature.

7.2.5 Print Reports at Specified Time (PSET)

Use the PSET command to issue system usage reports (Flash Memory Usage Report, Port
Usage Report, Call Account Report) at a specified time each day. A printer or data terminal
must be connected to the VPS at the RS-232C port for the reports to be printed or displayed.
1.
Type PSET, then Press RETURN.
$ PSET
Report Print Out Service [ Disable ]
1 : Enable 2: Disable :=
2.
Type [1] to enable this function or Type [2] to disable it.
Enter The Print Out Time (HH:MM, AM/PM) :=
3.
Type the time to print the reports.
Note
The reports will be displayed only if the system is in the mode where you see the
following prompt:
>
Installation Manual
SYSTEM MAINTENANCE AND TROUBLESHOOTING
161