Panasonic KX-TVS90 Installation Manual page 251

Operator's Parameters-Day Mode-Operator 3
Operator 3 receives operator-seeking calls when Operator 2 is busy or unanswered and
Operator 2's parameters are set as follows:
• Busy Coverage Mode—No Answer Coverage
• No Answer Coverage Mode—next Operator
To access the proper menu for Operator Parameters-Day Mode-Operator 3, follow
the menu path as shown:
System Administration Top Menu-1-4-1-2-1-3
Parameter
Operator's
Extension
Operator's
Mailbox No.
Busy Coverage
Mode
Installation Manual
Value Range
(Default)
1-5 digits Specifies the extension number for Operator 3. Any
(None) valid extension number can be assigned.
2-5 digits Specifies the mailbox number for Operator 3. Callers to
(None) Operator 3 are prompted to leave a message in this
mailbox depending upon how the Busy Coverage or No
Answer Coverage modes are set.
1. Hold Specifies how to handle calls when the Operator 3
2. No Answer extension is busy.
Coverage
3. Call Waiting
1. Hold—Automatically places the caller on hold and
4. Disconnect
the Operator 3 extension is called again.
Message
(Hold)
2. No Answer Coverage—Offers the option specified
by the No Answer Coverage Mode to the caller.
3. Call Waiting—Signals Operator 3 when another call
is waiting using the Call Waiting feature of the PBX.
4. Disconnect Message—Disconnects the call after
playing "Thank you for calling".
SYSTEM ADMINISTRATOR'S GUIDE
Table 47
Description/Function
251