C5 Changing The Service Mode Setting - Panasonic KX-TVS90 Installation Manual

C5 CHANGING THE SERVICE MODE SETTING

The VPS automatically activates the appropriate call handling method according to the Time
Service setting (Day, Night, Lunch, and Break Services); however, the System Manager or
System Administrator can change the current call handling method by selecting a specific
Service Mode.
Once the Service Mode has been changed, it is retained unless the System Manager or System
Administrator changes it again, even after the power is cut and restored.
Note
While the System Administrator programs via a personal computer, the System Manager
cannot change the Service Mode setting. The VPS plays "Sorry, this function is not
available".
Assigning the Service Mode
There are 6 Service Modes available:
• Automatic Mode: Operates according to the setting in Time Service (default)
• Manual Day Mode: Operates only in Day Mode
• Manual Night Mode: Operates only in Night Mode
• Manual Lunch Mode: Operates only in Lunch Mode
• Manual Break Mode: Operates only in Break Mode
• PBX Control Mode: Operation changes depending on PBX time period (available only
with APT/DPT Integration)
In the Automatic Mode, services have this order of priority:
Holiday Service > Caller ID Call Routing > Trunk Service > Port Service
(Holiday service has the highest priority.)
In the Manual Modes (Day, Night, Lunch, or Break), Holiday Service is disregarded:
Caller ID Call Routing > Trunk Service > Port Service
(Holiday Service is disregarded.)
In the PBX Control Mode: (1) under DPT Integration, the VPS obtains the Time Service (Day,
Night, Lunch or Break) setting from the PBX when a call is received through a PBX and
operates accordingly; (2) under APT Integration, the VPS obtains the Time Service setting
from the PBX when the time period changes at the PBX or APT data link has been established
between the VPS and PBX.
When the Integration Mode is other than APT/DPT Integration and the PBX Control Mode is
selected, the VPS will operate in the Automatic Mode.
Depending on the model and/or the software version of the connected PBX, the PBX Control
Installation Manual
SYSTEM MANAGER'S GUIDE
309