Caller Id Screening - Panasonic KX-TVS90 Installation Manual

Caller ID Screening

23. a)
b)
Message Notification
24. a)
b)
c)
d)
e)
f)
g)
Installation Manual
The current setting plays. Press [1] to change the setting (enable or disable).
Confirm the entry is correct and Press [2] to accept it.
The current setting plays. Press [1] to change the setting (enable or disable). If the
Message Notification is enabled, go to Step 24b below.
Press [1], [2], [3], [4], or [5] to choose the desired Beeper Callback Number Entry
Mode.
• [1] Caller Select Mode
• [2] Without message mode
• [3] Before message recording mode
• [4] After message recording mode
• [5] Disable All Entry Mode (Caller cannot access beeper)
Confirm the entry is correct and Press [6] to accept it.
The current setting of MWL Notification for Unreceived Message plays. Press [1]
to change the setting (enable or disable).
Confirm the entry is correct and Press [2] to accept it.
The current setting of Device Notification for Unreceived Message plays. Press [1]
to change the setting (enable or disable).
Confirm the entry is correct and Press [2] to accept it. Return to Step 24a above.
SYSTEM MANAGER'S GUIDE
305