For Vigor2912N - Draytek Vigor2912 Series User Manual

1 . 2 . 2 F o r V i g o r 2 9
1 . 2 . 2 F o r V i g o r 2 9
LED
ACT (Activity)
WCF
QoS
WLAN
LAN (P4~P1)
WAN(W2~W1)
VPN
USB
1 2 n
1 2 n
Status
Blinking
Off
On
Off
On
On
Blinking
On
Off
Blinking
On
Off
Blinking
On
On
Blinking
Explanation
The router is powered on and running normally.
The router is powered off.
The Web Content Filter is active. (It is enabled from
Firewall >> General Setup).
The Web Content Filter is inactive.
The QoS function is active.
Wireless access point is ready.
It will blink slowly while wireless traffic goes through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and will return
to normal condition after two minutes. (You need to
setup WPS within 2 minutes.)
The port is connected.
The port is disconnected.
The data is transmitting.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
The VPN tunnel is active.
USB device is connected and ready for use.
The data is transmitting.
5 Vigor2912 Series User's Guide