Draytek Vigor2912 Series User Manual page 106

Details Page
IPv6
Advanced
4 . 1 . 3 . 1
4 . 1 . 3 . 1
To use PPPoE as the accessing protocol of the internet, please click the PPPoE tab. The
following web page will be shown.
Available settings are explained as follows:
Item
Enable/Disable
ISP Access Setup
Vigor2912 Series User's Guide
This button will open different web page (based on IPv4)
according to the access mode that you choose in WAN
interface.
Note that Details Page will be changed slightly based on
ADSL/VDSL physical mode specified on WAN>>General
Setup.
This button will open different web page (based on Physical
Mode) to setup IPv6 Internet Access Mode for WAN
interface.
If IPv6 service is active on this WAN interface, the color of
"IPv6" will become green.
It is used to configure DHCP client option.
D e t a i l s P a g e f o r P
D e t a i l s P a g e f o r P
Description
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
Username – Type in the username provided by ISP in this
field.
The maximum length of the user name you can set is 63
P P o E i n W A N 1 / W A
P P o E i n W A N 1 / W A
96
N 2
N 2