Draytek Vigor2912 Series User Manual page 186

Block TCP flag scan
Block Tear Drop
Block Ping of Death
Block ICMP Fragment
Block Unassigned
Numbers
Warning Messages
Vigor2912 Series User's Guide
Any broadcast UDP packets received from the Internet is
blocked.
Activating the DoS/DDoS defense functionality might
block some legal packets. For example, when you activate
the fraggle attack defense, all broadcast UDP packets
coming from the Internet are blocked. Therefore, the RIP
packets from the Internet might be dropped.
Check the box to activate the Block TCP flag scan function.
Any TCP packet with anomaly flag setting is dropped. Those
scanning activities include no flag scan, FIN without ACK
scan, SYN FINscan, Xmas scan and full Xmas scan.
Check the box to activate the Block Tear Drop function.
Many machines may crash when receiving ICMP datagrams
(packets) that exceed the maximum length. To avoid this
type of attack, the Vigor router is designed to be capable of
discarding any fragmented ICMP packets with a length
greater than 1024 octets.
Check the box to activate the Block Ping of Death function.
This attack involves the perpetrator sending overlapping
packets to the target hosts so that those target hosts will
hang once they re-construct the packets. The Vigor routers
will block any packets realizing this attacking activity.
Check the box to activate the Block ICMP fragment
function. Any ICMP packets with more fragment bit set are
dropped.
Check the box to activate the function. Individual IP packet
has a protocol field in the datagram header to indicate the
protocol type running over the upper layer. However, the
protocol types greater than 100 are reserved and undefined at
this time. Therefore, the router should have ability to detect
and reject this kind of packets.
We provide Syslog function for user to retrieve message
from Vigor router. The user, as a Syslog Server, shall receive
the report sending from Vigor router which is a Syslog
Client.
All the warning messages related to DoS Defense will be
sent to user and user can review it through Syslog daemon.
Look for the keyword DoS in the message, followed by a
name to indicate what kind of attacks is detected.
176