Draytek Vigor2912 Series User Manual page 346

Notification Host IP
(IPv6)
Trap Timeout
Enable SNMPV3 Agent
USM User
Auth Algorithm
Auth Password
Privacy Algorithm
Privacy Password
Click OK to save these settings.
Vigor2912 Series User's Guide
Set the IPv6 address of the host that will receive the trap
community.
The default setting is 10 seconds.
Check it to enable this function.
USM means user-based security mode.
Type a username which will be used for authentication. The
maximum length of the text is limited to 23 characters.
Choose one of the encryption methods listed below as the
authentication algorithm.
Type a password for authentication. The maximum length
of the text is limited to 23 characters.
Choose one of the methods listed below as the privacy
algorithm.
Type a password for privacy. The maximum length of the
text is limited to 23 characters.
336