Usb User Management - Draytek Vigor2912 Series User Manual

Samba Service Settings
Access Mode
NetBios Name Service
After finishing all the settings here, please click OK to save the configuration.
4 . 1 3 . 2 U S B U s
4 . 1 3 . 2 U S B U s
This page allows you to set profiles for FTP/Samba users. Any user who wants to access into
the USB storage disk must type the same username and password configured in this page.
Before adding or modifying settings in this page, please insert a USB storage disk first.
Otherwise, an error message will appear to warn you.
Click index number to access into configuration page.
Vigor2912 Series User's Guide
Default Charset - At present, Vigor router supports four
types of character sets. Default Charset is for English based
file name.
Click Enable to invoke samba service via the router.
LAN Only – Users coming from internet cannot connect to
the samba server of the router.
LAN And WAN - Both LAN and WAN users can
access samba server of the router.
For the NetBios service of USB storage disk, you have to
specify a workgroup name and a host name. A workgroup
name must not be the same as the host name. The
workgroup name can have as many as 15 characters and the
host name can have as many as 23 characters. Both them
cannot contain any of the following--- ; : " < > * + = \ | ?.
Workgroup Name – Type a name for the workgroup.
Host Name – Type the host name for the router.
e r M a n a g e m e n t
e r M a n a g e m e n t
314