Draytek Vigor2912 Series User Manual page 325

Available settings are explained as follows:
Item
FTP/Samba User
Username
Password
Confirm Password
Home Folder
Description
Enable – Click this button to activate this profile (account)
for FTP service or Samba User service. Later, the user can
use the username specified in this page to login into FTP
server.
Disable – Click this button to disable such profile.
Type the username for FTP/Samba users for accessing into
FTP server (USB storage disk). Be aware that users cannot
access into USB storage disk in anonymity. Later, you can
open FTP client software and type the username specified
here for accessing into USB storage disk. The length of the
name is limited to 11 characters.
Note: "Admin" could not be typed here as username, for
the word is specified for accessing into web pages of Vigor
router only. Also, it is reserved for FTP firmware upgrade
usage.
Note: FTP Passive mode is not supported by Vigor Router.
Please disable the mode on the FTP client.
Type the password for FTP/Samba users for accessing FTP
server. Later, you can open FTP client software and type
the password specified here for accessing into USB storage
disk. The length of the password is limited to 11 characters.
Type the password again to make confirmation.
It determines the folder for the client to access into.
The user can enter a directory name in this field. Then, after
clicking OK, the router will create the specific/new folder
in the USB storage disk. In addition, if the user types "/"
here, he/she can access into all of the disk folders and files
in USB storage disk.
Note: When write protect status for the USB storage disk is
ON, you cannot type any new folder name in this field.
Only "/" can be used in such case.
315 Vigor2912 Series User's Guide