Remote Dial-In User - Draytek Vigor2912 Series User Manual

4 . 1 0 . 7 R e m o t e
4 . 1 0 . 7 R e m o t e
You can manage remote access by maintaining a table of remote user profile, so that users can
be authenticated to dial-in via VPN connection. You may set parameters including specified
connection peer ID, connection type (VPN connection - including PPTP, IPsec Tunnel, and
L2TP by itself or over IPsec) and corresponding security methods, etc.
The router provides 32 access accounts for dial-in users. Besides, you can extend the user
accounts to the RADIUS server through the built-in RADIUS client function. The following
figure shows the summary table.
Available settings are explained as follows:
Item
Set to Factory Default
Index
User
Active
Status
Click each index to edit one remote user profile. Each Dial-In Type requires you to fill the
different corresponding fields on the right. If the fields gray out, it means you may leave it
untouched. The following explanation will guide you to fill all the necessary fields.
Vigor2912 Series User's Guide
D i a l - i n U s e r
D i a l - i n U s e r
Description
Click to clear all indexes.
Click the number below Index to access into the setting
page of Remote Dial-in User.
Display the username for the specific dial-in user of the
LAN-to-LAN profile. The symbol ??? represents that the
profile is empty.
Check the box to enable the selected profile.
Display the access state of the specific dial-in user. The
symbol V and X represent the specific dial-in user to be
active and inactive, respectively.
268