Schedule - Draytek Vigor2912 Series User Manual

4 . 9 . 2 S c h e d u l
4 . 9 . 2 S c h e d u l
The Vigor router has a built-in real time clock which can update itself manually or
automatically by means of Network Time Protocols (NTP). As a result, you can not only
schedule the router to dialup to the Internet at a specified time, but also restrict Internet access
to certain hours so that users can connect to the Internet only during certain hours, say,
business hours. The schedule is also applicable to other functions.
You have to set your time before set schedule. In System Maintenance>> Time and Date
menu, press Inquire Time button to set the Vigor router's clock to current time of your PC.
The clock will reset once if you power down or reset the router. There is another way to set up
time. You can inquiry an NTP server (a time server) on the Internet to synchronize the router's
clock. This method can only be applied when the WAN connection has been built up.
Each item is explained as follows:
Item
Set to Factory Default
Index
Status
You can set up to 15 schedules. Then you can apply them to your Internet Access or VPN
and Remote Access >> LAN-to-LAN settings.
To add a schedule:
1. Click any index, say Index No. 1.
2. The detailed settings of the call schedule with index 1 are shown below.
Vigor2912 Series User's Guide
e
e
Description
Clear all profiles and recover to factory settings.
Click the number below Index to access into the setting
page of schedule.
Display if this schedule setting is active or inactive.
238