Snmp - Draytek Vigor2912 Series User Manual

4 . 1 4 . 9 S N M P
4 . 1 4 . 9 S N M P
This page allows you to configure settings for SNMP and SNMPV3 services.
The SNMPv3 is more secure than SNMP through the encryption method (support AES and
DES) and authentication method (support MD5 and SHA) for the management needs.
Available settings are explained as follows:
Item
Enable SNMP Agent
Get Community
Set Community
Manager Host IP (IPv4)
Manager Host IP (IPv6)
Trap Community
Notification Host IP
(IPv4)
Description
Check it to enable this function.
Set the name for getting community by typing a proper
character. The default setting is public.
The maximum length of the text is limited to 23 characters.
Set community by typing a proper name. The default setting
is private.
The maximum length of the text is limited to 23 characters.
Set one host as the manager to execute SNMP function.
Please type in IPv4 address to specify certain host.
Set one host as the manager to execute SNMP function.
Please type in IPv6 address to specify certain host.
Set trap community by typing a proper name. The default
setting is public.
The maximum length of the text is limited to 23 characters.
Set the IPv4 address of the host that will receive the trap
community.
335 Vigor2912 Series User's Guide