Draytek Vigor2912 Series User Manual page 132

Click Index 1 to access into the following page for configuring load-balance policy.
Available settings are explained as follows:
Item
Enable
Protocol
Binding WAN interface
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Dest Port Start
Vigor2912 Series User's Guide
Description
Check this box to enable this policy.
Use the drop-down menu to choose a proper protocol for
the WAN interface.
Choose the WAN interface (WAN1/WAN2/WAN3) for
binding.
Auto failover to other WAN – Check this button to lead
the data passing through other WAN automatically when
the selected WAN interface is failover.
Type the source IP start for the specified WAN interface.
Type the source IP end for the specified WAN interface. If
this field is blank, it means that all the source IPs inside the
LAN will be passed through the WAN interface.
Type the destination IP start for the specified WAN
interface.
Type the destination IP end for the specified WAN
interface. If this field is blank, it means that all the
destination IPs will be passed through the WAN interface.
Type the destination port start for the destination IP.
122