Draytek Vigor2912 Series User Manual page 104

W A N 3
W A N 3
To use 3G network connection through 3G USB Modem, please configure WAN3 interface.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Line Speed
Active Mode
Backup Type
Vigor2912 Series User's Guide
w i t h U S B
w i t h U S B
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
If your choose According to Line Speed as the Load
Balance Mode, please type the line speed for downloading
and uploading for such WAN interface. The unit is kbps.
Choose Always On to make the WAN3 connection being
activated always.
If you choose Backup as the Active Mode, Backup Type
will appear. Please specify which WAN will be treated as
the Backup WAN.
When any of selected WAN disconnect – Such backup
WAN will be activated when any master WAN interface
disconnects.
When all of selected WAN disconnect – Such backup
WAN will be activated only when all master WAN
interfaces disconnect.
94