Draytek Vigor2912 Series User Manual page 342

AlertLog Setup
Mail Alert Setup
Click OK to save these settings.
For viewing the Syslog, please do the following:
1. Just set your monitor PC's IP address in the field of Server IP Address
2. Install the Router Tools in the Utility within provided CD. After installation, click on the
Router Tools>>Syslog from program menu.
3. From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information, select the network adapter used to connect to the router.
Otherwise, you won't succeed in retrieving information from the router.
Vigor2912 Series User's Guide
Check Enable to activate function of alert log.
AlertLog Port - Type the port number for alert log. The
default setting is 514.
Check Enable to activate function of mail alert.
Send a test e-mail - Make a simple test for the e-mail
address specified in this page. Please assign the mail
address first and click this button to execute a test for verify
the mail address is available or not.
SMTP Server/SMTP Port - The IP address/Port number
of the SMTP server.
Mail To - Assign a mail address for sending mails out.
Return-Path - Assign a path for receiving the mail from
outside.
Use SSL - Check this box to use port 465 for SMTP server
for some e-mail server uses https as the transmission
method.
Authentication - Check this box to activate this function
while using e-mail application.
User Name - Type the user name for
authentication.
Password - Type the password for
authentication.
Enable E-mail Alert - Check the box to send alert message
to the e-mail box while the router detecting the item(s) you
specify here.
332