Draytek Vigor2912 Series User Manual page 173

Available settings are explained as follows:
Item
Filter
Sessions Control
Quality of Service
Policy Route
User Management
APP Enforcement
Description
Select Pass or Block for the packets that do not match with
the filter rules.
The number typed here is the total sessions of the packets
that do not match the filter rule configured in this page. The
default setting is 60000.
Choose one of the QoS rules to be applied as firewall rule.
For detailed information of setting QoS, please refer to the
related section later.
Choose the WAN interface for applying Policy Route.
Such item is available only when Rule-Based is selected in
User Management>>General Setup. The general firewall
rule will be applied to the user/user group/all users specified
here.
Note: When there is no user profile or group profile existed,
Create New User or Create New Group item will appear
for you to click to create a new one.
Select an APP Enforcement profile for global IM/P2P
application blocking. If there is no profile for you to select,
please choose [Create New] from the drop down list in this
page to create a new profile. All the hosts in LAN must
follow the standard configured in the APP Enforcement
profile selected here. For detailed information, refer to the
section of APP Enforcement profile setup. For
troubleshooting needs, you can specify to record information
for IM/P2P by checking the Log box. It will be sent to
163 Vigor2912 Series User's Guide