For Vigor2912N - Draytek Vigor2912 Series Quick Start Manual

1 . 1 . 2 F o r V i g
1 . 1 . 2 F o r V i g
LED
ACT (Activity)
WCF
QoS
WLAN
LAN (P4~P1)
WAN(W2~W1)
VPN
USB
Vigor2912 Series Quick Start Guide
o r 2 9 1 2 n
o r 2 9 1 2 n
Status Explanation
Blinking The router is powered on and running
normally.
Off The router is powered off.
On The Web Content Filter is active. (It is
enabled from Firewall >> General
Setup).
Off The Web Content Filter is inactive.
On The QoS function is active.
Off The QoS function is inactive.
On
Wireless access point is ready.
It will blink slowly while wireless traffic
Blinking
goes through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On Internet connection is ready.
Off Internet connection is not ready.
Blinking The data is transmitting.
On The VPN tunnel is active.
On USB device is connected and ready for use.
Blinking The data is transmitting.
4