The IMM2 can be accessed and controlled through any of the following methods:
Command-line interface (CLI Telnet or CLI SSH)
Web interface (if IMM Standard and Advanced FoD is available)
IPMI 2.0 (local or remote)
Advanced Settings Utility (ASU)
SNMP v1 and v3
Figure 7-1 shows the available IMM2 access methods.
nx360 M4
OS
Figure 7-1 Integrated Management Module II access methods
IPMI / Telnet-SSH / ASU / HTTP / SNMP (out-of-band)
IMM2
LAN over USB (in-band)
Chapter 7. Hardware management
IMM2 port
UEFI
161