Program-Storing Your Print Settings In Memory; Storing Your Settings - Ricoh Priport JP5000 Operating Instructions Manual

OPERATION
Program—Storing Your Print Settings In
Memory
1
You can store up to 9 frequently used
print job settings in machine memory
and recall them for future use.
Note
The stored programs are not
cleared when you turn off the main
switch.
The stored programs cannot be de-
leted. If you want to change a
stored program, overwrite it.

Storing Your Settings

A
Set the print settings you want to
put into memory.
B
Press the { { { { Program} } } } key.
C
Select [Store] with the [→ → → → ] or { { { { } } } } } } } }
key.
D
Press the [OK] key.
72
Note
The program numbers (1 to 9)
will be displayed in the panel
display.
If a user program has been pro-
tected, that program number
will not appear in the display.
To change a protected user pro-
gram, see ⇒ P.73 "Protecting A
Program".
If all the user programs have
been protected, you cannot
store any settings. Press the
[Cancel] key.
E
Select the program number you
want to store the settings in with
the [← ← ← ← ], [→ → → → ], { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
Note
TPES190E
You can also select the program
number with the Number keys.
F
Press the [OK] key.
Note
If this program number is al-
ready used, the machine asks
whether you wish to overwrite
it or not. Press the [Yes] or [No]
key.
TPES570E
TPES530E