Front Wheel Installation - Yamaha Libero Workshop Manual

L-154
FRONT WHEEL AND FRONT BRAKES

FRONT WHEEL INSTALLATION

Reverse the "REMOVAL" procedure
Note the following points
1. Lubricate :
• Axle Front Wheel
• Bearings
• Oil Seal (lips)
• Drive/Driven Gear (Speedometer)
Recommended lubricant :
Lithium Soap base grease
2. Install :
• Front Wheel
NOTE:
Make sure that the slot ç in the Shoe Plate fits
over the Stopper è on the Front Fork Outer
Tube LH
3. Tighten :
• Front Wheel Axle
• Axle Nut (Front Wheel)
NOTE :
Do not loosen the Axle Nut after Torque tight-
ening. If Axle Nut groove is not aligned with the
Wheel axle Cotter Pin hole, align groove to hole
by tightening up on the Axle Nut.
CAUTION:
WARNING
Before tightning the Wheel Axle, Stroke the
Front Fork several times to check for proper
fork operation
Axle Nut :
45.5 Nm(4.55 m.kg. 33 ft.lb)
4. Install :
• Cotter Pin New and bend its ends.
WARNING
Always use a new Cotter Pin
6-8
CHAS