Yamaha Libero Workshop Manual page 79

L-78
MAINTENANCE SPECIFICATIONS
9. Remove :
10. Remove :
NOTE :
Before removing the Piston Pin Circlip, cover
the Crankcase with a clean cloth to prevent the
Circlip from falling into the Crankcase cavity.
C. D. I. MAGNETO
NOTE :
The CDI Magneto can be removed while the
Engine is mounted on the Motorcycle by remov-
ing the following parts :
• Shift Pedal
• Cover Chain Case (L. H.)
1. Remove :
NOTE :
Loosen the Bolts in criss cross pattern.
2. Attach
4-6
ENG
• Dowel Pins ¿
• Gasket (Cylinder) À
• Piston Pin Circlip ¿ 2 nos
• Piston Pin À , using Piston Pin Replacer
• Piston Á
Piston Pin Replacer :
YSST - 207
• Bolts (Crankcase Cover-1 L.H.) ¿ 7 nos
• Crankcase Cover 1 (L.H.)
• Neutral Light wire from Neutral Switch
• Magneto holder
Magneto Holder :
YSST - 601A