Removal - Yamaha Libero Workshop Manual

R-137
CARBURETOR

REMOVAL

1. Remove :
• Side Covers (LH & RH)
Refer to the "SIDE COVER, SEAT AND
FUEL TANK" section in Chapter 3, Page
no 3-3
2. Drain :
• Fuel (Float Chamber)
NOTE :
Place a rag under the over flow hose to absorb
the spilt fuel.
WARNING
Petrol is highly flammable. Avoid spilling fuel
on the hot Engine.
3. Disconnect :
• Air Vent Hose ¿
• Fuel Hose À
• Over Flow Hose Á
4. Loosen :
• Screw Clamp (Air Filter Hose) Â
• Bolts (Air Filter Case ) Ã (2 nos)
• Open Bolt (Air filter case) Ä
5. Remove
• Bolts (Intake Manifold) ¿ (2 nos)
• Joint À with 'O' ring
6. Remove :
• Carburetor Assembly with 'O' ring
7. Remove
• Throttle Cable ¿
Remove with Carburetor Chamber Top
and Throttle Valve
5-2
CARB