Yamaha Libero Workshop Manual page 114

R-113
ENGINE ASSEMBLY AND ADJUSTMENTS
CRANKCASE LH
1. Apply :
• Sealant on the Crankcase Mating surfaces
Sealant
Yamaha bond No. 1215:
90890-85505
2. Install :
• Dowel Pins ¿
NOTE :
Do not allow any sealant to come in contact with
the Oil Galleries ç and è as shown in the fig-
ure.
3. Install:
• Crankcase RH with the Crankcasse LH.
Tap lightly on the Case with mallet.
NOTE :
Tighten the Engine Mounting Nuts-2 nos for
holding the Engine on the engine stand.
4. Tighten :
• Bolts 2 nos Crankcase RH
• Bolts 8 nos Crankcase LH as per
sequence
Bolts (Crankcase) :
10 Nm (1.0 m.kg, 7.2 ft.lb)
5. Apply :
• 4-Stroke Engine Oil on the Crank Pin,
Bearings and Oil Delivery Hole
6. Check :
• Crankshaft and transmission operation for
smooth rotation/ shifting by hand
Unsmooth operation Ÿ Reassemble/Repair
4-41
ENG