Yamaha Libero Workshop Manual page 172

FRONT FORK
5. Tighten :
• Bolt (Cylinder Complete) ¿ holding the
Cylinder Complete with a T-Handle À
Bolt (Cylinder Complete) :
23 Nm (2.3 m.kg, 17 ft.lb)
T-Handle
YSST - 213
6. Install :
• Oil Seal ¿ New
Installation Tool
TFF Oil Seal Installation Tool
YSST - 275
NOTE :
• Before installing the Oil Seal ¿ apply lithium
soap base grease onto the Oil Seal lips.
• Adjust the Ring Snap so that it fits into the
Outer Tube Groove
CAUTION:
WARNING
Make sure that the Oil Seal numbered side
faces upward
7. Install :
• Washer ¿
• Ring Snap À
• Dust Seal Á
8. Inspect :
• Inner Tube operation
Unsmooth operation Ÿ Disassembly and
recheck
6-25
R-171
CHAS
Using TFF Oil Seal