Clutch Cable; Drive Chain; Exhaust Muffler; Footrest Assembly - Yamaha Libero Workshop Manual

L-74
3
ENGINE REMOVAL

CLUTCH CABLE

1. Remove :
• Clutch cable
ææææææææææææææææææææææææææææææææææ
Removal steps :
• Loosen the locknut ¿ of the Clutch Lever.
• Turn in the Adjuster À to enough to free the
inner Clutch Cable
• Unhook the Cable End from Push Lever Á on
the Crankcase L.H.
ææææææææææææææææææææææææææææææææææ

DRIVE CHAIN

1. Remove :
• Crankcase Cover#1 (L.H.) ¿
• Drive Chain Case upper À and lower Á
2. Slack off the Drive Chain
Refer to "DRIVE CHAIN SLACK ADJUST-
MENT" section in Chapter 3, Page no 3-20
3. Remove :
• Bolt ¿ (Holder Sprocket)
• Holder Sprocket À
• Sprocket Drive Á
Remove with the Drive Chain

EXHAUST MUFFLER

1. Remove :
• Bolt (exhaust pipe)
• Bolt (muffler)
Refer to "EXHAUST SYSTEM" section in
Chapter 3, Page no 3-15
2. Remove :
• Exhaust muffler

FOOTREST ASSEMBLY

1. Remove:
• Bolt (footrest) 4 nos ¿
• Bolt Axle - Lower rear mounting À
• Footrest Assembly
4-2
ENG