Front Wheel Installation; Rear Wheel Removal - Yamaha Fazer Owner's Manual

Colorprofile:GenericCMYKprinterprofile
CompositeDefaultscreen
1. Stopper

Front wheel installation

When installing the front wheel,
reverse the removal procedure.
Pay attention to the following points:
1. Make sure the slot in the gear
meter assembly
stopper on the front fork outer
tube.
2. Make sure the axle nut is properly
torqued and a new cotter pin is
installed.
Chapt6_c.cdr
Saturday,October01,20051:05:32PM
PERIODIC MAINTENANCE AND MINOR REPAIR
WARNING
Always use a new cotter pin.
Axle nut torque:
33 ft-lb (4.55 m-kg)
1
fits over the
6-31
7

Rear wheel removal

WARNING
• It is advisable to have a
YAMAHA dealer service the
wheel.
• S e c u r e l y s u p p o r t t h e
Motorcycle so there is no
danger of it falling over.