Crankcase - Yamaha Libero Workshop Manual

R-83
ENGINE DISASSEMBLY

CRANKCASE

1. Remove :
• Bolts (Crankcase RH-2 nos) ¿
2. Remove :
• Bolts (Crankcase LH-8 nos)
NOTE :
• Loosen the Bolts in a crisscross pattern.
• Loosen each Bolts 1/4 turn at a time and re-
move them after all are loose.
1. Remove :
• Right crankcase half
NOTE :
Open the Engine stand mounting Nuts 2 nos .
Then separate the Crankcase by using the flat
head screw driver in the separating slit ç.
CAUTION:
WARNING
• Do not use the flat head screw driver ex-
cept at the separating slot.
• Separate the Crankcase after first check-
ing that the shift cam segments and the
Drive Axle Circlip can be removed.
• Do not damage the Crankcase mating sur-
faces.
2. Remove :
• Dowel pins ¿
4-11
ENG