Installation - Yamaha Libero Workshop Manual

L-44
1
2
SIDE COVERS, SEAT AND FUEL TANK
a
2
1

INSTALLATION

Reverse the REMOVAL procedure.
Note the following points.
1. Install
• Fuel Tank ¿
• Damper Rubber À
• Plate Á
• Bolt Â
• Fuel Hose Ã
Bolt (fuel tank)
20 Nm (2.0 mkg; 14.4 ft.lb)
NOTE :
• Keep the projection on plate Á downward.
2. Install
• Seat
• Bolts ¿ and À
NOTE :
• Insert the projection ç on the rear of the seat
into the receptacles è on the Chassis, then
push down front of the seat and tighten the
b
bolts.
Bolt (Seat)
3.8 Nm (0.38 mkg, 3.0 ft.lb)
3. Install
• Side Cover (LH) ¿ and lock with Key
4. Install
• Side Cover (RH) À
5. Tighten
• Screw Á
3-5
INSP
ADJ