Yamaha Libero Workshop Manual page 118

R-117
ENGINE ASSEMBLY AND ADJUSTMENTS
SEGMENT AND SHIFT SHAFT
1. Install
• Dowel Pins ¿ on the Cam Shifter À
2. Install :
• Segment ¿ using Torx Bit Tool
Torx Bit Tool
YSST - 611
NOTE :
Fit the Dowel Pins on the Cam Shifter to the lo-
cating hole ç on the Cam Shifter and install the
Segment ¿
3. Install :
• Stopper Lever ¿
• Spring À
4. Tighten
• Bolt stopper lever Á
Bolt (Stopper Lever) :
10 Nm (1.0 m.kg, 7.2 ft.lb)
NOTE :
Hook the Spring ends on the Stopper Lever ¿
and the Crankcase Pin
Mesh the Stopper Lever ¿ with the Cam Shifter
Stopper.
5. Install :
• Shift Shaft Assembly Á
NOTE :
Apply Oil to the Stopper Pin and hook the Spring
ends on the Stopper pin Â
4-45
ENG