Disassembly - Yamaha Libero Workshop Manual

L-138

DISASSEMBLY

DISASSEMBLY
NOTE:
The following parts can be cleaned and
inspected without Carburetor Disassembly.
• Throttle Valve Assembly
• Starter lever
• Starter Plunger Assembly
• Before disassembly of Carburetor clean the
outer surface of Carburtor and Check the
Starter Lever Opeartion.
1. Open
• Screws (Float chamber) ¿ 4 Nos
2. Remove :
• Float Chamber À
• Seal Float Chamber Á
3. Remove :
• Float Pin ¿
• Float À
4. Remove :
• Needle Valve ¿
5. Remove
• Screw (stopper plate) À
• Stopper Plate Á
• Valve Seat Â
6. Remove :
• Main Jet ¿
• Main Nozzle À
5-3
CARB