Yamaha Libero Workshop Manual page 112

R-111
ENGINE ASSEMBLY AND ADJUSTMENTS
TRANSMISSION, SHIFT CAM AND
SHIFT FORK INSTALLATION
1. Measure :
• Axle Main Assembled length ç
Assembled length (Axle Main):
82.25 ~ 83.45 mm
2. Install :
• Push rod # 2 ¿ in the Axle Main.
3. Install :
The following parts in Crankcase LH in
following sequence.
• Shift Fork "L" (left) ¿
(face the "L" side for the Clutch side.)
• Shift Fork "R" (right) À
(face the "R" side for the Clutch side)
• Shift Fork "C" (center) Á
(face the "C" side for the Clutch side)
• Shift Fork Guide Bar #1 Â (Short)
• Shift Fork Guide Bar #2 Ã (Long)
NOTE :
Install the Shift Forks with the embossed mark
facing upward.
4. Check :
• Shift Cam operation
Improper operation Ÿ Reassemble/Repair
NOTE :
Check the transmission and Shift Forks for
smooth operation by turning the Shift cam with
your hand.
4-39
ENG